Mazda Enterprise

Vadodara, Gujarat

GST No. 24ABFFM6958F1Z2

Call 08046055919 86% Response Rate

Send Enquiry

Termination Kit

Termination Kit

Pioneers in the industry, we offer raychem rsti touch proof terminations and raychem medium-voltage terminations from India.

Raychem RSTI Touch Proof Terminations

Get Best Quote

Rs 2,455 / PiecePrice on Request

Product Brochure

Voltage	1.1 kV
Core Type	1 Core
Material	Epdm
Usage/Application	GIS, RMU
Brand	Raychem
Maximum System Voltage	42 kV
DC Voltage Withstand, 15 Min	125 kV
Model Number	RSTI-68
Connector Cross-section Range	35 - 300 mm 2
Continuous Current Rating	800 A
Cable Insulation Diameter Range	22.4 - 42.0 mm
AC Voltage Withstand, 5 Min	93.5 kV
Thermal Short Circuit, 3 S	32 kA
Basic Impulse Level	200 kV
Thermal Short Circuit, 1 S	55 kA
Partial Discharge At 2 U0	< 2 pC
Dynamic Short Circuit	125 kA

Raychem RSTI Touch Proof Terminations are designed to connect single- and three-core polymeric cables to medium-voltage gas insulated switchgear and other equipment using CENELEC bushings Type C 1 =630 A and C 2 =1250 A, specified up to 42 kV. Made of a highly modified silicone rubber and protected by a thin walled outer conductive screen connected to earth, RSTI connectors are equally suited for indoor and outdoor installation.
Supporting a wide application range, the design incorporates one body and two stress cone adapters to cover all cross-sections from 35 to 300 mm2. The overall and cut back dimensions are designed to take up minimum space in the terminal box. RSTI connectors are equipped with a capacitive test point for determining whether the circuit is energised. A conductive cap protects this test point.

Features:

The insulation of the connector is made of a highly modified silicone rubber characterised by high tracking resistance, elongation at break and non-flammability.
A thin walled screen is permanently bonded onto the insulation and protects the connection system against accidental contact.
The screened connector need not be removed for over sheath testing.
The screened cable connector exceeds CENELEC HD 629.1 S2 requirements, which includes BS; VDE and other international specifications.
Design fits 630 A and 1250 A bushings (Interface “C 1 ” and “C 2 ”) as specified by EN 50180 and EN 50181.
The compact design supports the use of double “T” connections inside standard terminal boxes.
The wide application range covers cable cross sections from 35 to 300 mm2.
Conductor connection with mechanical, DIN or deep indentlugs.
Easily accessible rear plug with capacitive test point.
Few accessories required for system test, double “T” and earth connection.
Complete kit including lugs facilitates installation and storage.

Design And Construction:

Screened body: A thin walled conductive outer screen is permanently bonded to the silicone rubber insulating material of the body.
Inner screen: A conductive inner layer, as a Faraday cage around the compression or mechanical lug, prevents corona at rated voltage.
Compression or mechanical lugs: Specially designed DIN and deep indent compression lugs, as well as tinned, mechanical lugs with shear bolts for connecting either aluminium or copper conductor cables.
Stress cone adapter: Relieves electrical stress at the point where the cable screen is cut. The insulated section, extending beyond the wire shielding, provides a convenient point for over sheath testing.
Earthing eye and ground lead: Provides a connection point for earthing the screen.
Threaded pin: A threaded pin together with a spring washer (wave type) and hex nut ensure a high performance electrical and mechanical contact with the bushing.
Rear plug with test point: Removable rear plug with capacitive test point.
Test point: The test point is used to determine whether the circuit is energised; alternatively it can be used for phasing.
Conductive end cap: Electrical screen and protection of the rear end of the separable connector.

View Complete details

Yes! I am Interested Request a call back

Raychem Medium-Voltage Terminations

Get Best Quote

Rs 1,200 / PiecePrice on Request

Product Brochure

Voltage	up to 33kV
Core Type	2 Core
Material	Polymeric
Usage/Application	Indoor And Outdoor Termination

Raychem Medium-Voltage Terminations for voltages up to 33kV are widely acknowledged in the industry and features a unique integrated ZnO based stress control system. This stress control system fills all irregularities and bonds to the insulation, providing a superb electrical performance.

Features:

Heat-shrink and elastomeric technologies
Impedance stress control system
Ceramic stress-control system
Proven anti-tracking, erosion-and UV resistant insulating material for indoor and outdoor applications
Easy and highly reliable installation
Range-taking
Suitable for crimp, soldered and mechanical lugs
Resistance to breakage and vandalism
Solutions for all cable constructions

Uniterm
Heat-shrinkable terminations for indoor & outdoor applications for polymeric cables up to 33kV.
Raychem heat-shrinkable terminations have a proven record of stability, durability and reliability over many years. Raychem cable accessories have been used by utilities and industrial companies.
Designed for both indoor and outdoor use in all climate conditions, the Uniterm range covers applications for polymeric cables up to 33kV. The components combine to provide the important functions such as electrical performance, stress control and moisture sealing, required for all medium voltage products.

Features: